<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>接口电路</title>
    <link>http://www.xxlinux.com/linux/embed/article/Interface/</link>
    <description>Latest 20 infos of 接口电路</description>
    <copyright>Copyright(C) Empire CMS</copyright>
    <generator>Empire CMS by Empire Studio.</generator>
    <lastBuildDate>Fri, 10 Sep 2010 01:33:15 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.xxlinux.com/linux/e/data/images/rss.gif</url>
      <title>Linux联盟</title>
      <link>http://www.xxlinux.com/linux/</link>
    </image>
    <item>
      <title><![CDATA[提高实时系统数据采集质量的研究]]></title>
      <description><![CDATA[ 摘要：从实现原理、实际应用效果等方面详细叙述了提高实时系统数据采集质量的几种实用技术，其中所述电路、方法均已在实际生产中得到了应用。    关键词：前向通道 数据采集 实用技术有向通道是实时系统的“人口” ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1893.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1893.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:51:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[一种用N+1个I/O口实现的N×N矩阵式键盘]]></title>
      <description><![CDATA[ 摘要：介绍一种用N+1个I/O端口实现N×N矩阵式键盘的一般方法，并用该方法设计一个5×5的矩阵式键盘作为例子，给出软件编制框图并对该方法进行探讨。    关键词：键盘 矩阵 接口电路引言随着微机系统应用领域的扩大 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1894.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1894.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:51:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[USB系统结构与应用设计]]></title>
      <description><![CDATA[ 摘要：通用串行总线（USB）是一种简单的计算机外围接口标准，它具有即插即用、扩展方便等优点，已成为计算机必备的一个接口。本文简要介绍USB总线的功能、拓朴结构及其数据传输过程，并举例说明USB接口的实际应用。 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1895.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1895.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:55 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[TMS320VC5410的McBSP串行接口技术与程序设计]]></title>
      <description><![CDATA[ 摘要：介绍TMS320VC5410的多功能串行接口（McBSP），并结合McBSP与高精度，高速率串行数据转换器MAX5410之间的串行通信，从硬件和软件两个方面具体讨论McBSP的设计方法。    关键词：DSP McBSP SPI 模数转换器一、 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1896.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1896.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:55 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[SSC&amp;nbsp;P300&amp;nbsp;PL网络接口控制器及应用]]></title>
      <description><![CDATA[ 摘要：SSC（扩频载波）信号传输技术所固有的可靠性及其基础的数据链路功能，在网络和通信的性能方面，相对于其他电力线通信方式，有了关键性的改进，将SSC P300连接到电力线上所需的外部电路是非常少的。本文介绍P ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1897.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1897.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[PCI总线及其接口芯片的应用]]></title>
      <description><![CDATA[ 摘要：介绍PCI总线的特点，对现有的PCI总线的接口设计方法进行分析；介绍PCI接口芯片CY7C09449PV的结构及其与数字信号处理器TMS320C32之间接口电路的设计，提出一种基于PCI和C32的数据采集与处理系统的设计方案。  ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1898.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1898.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[PC-ISDN的接口设计]]></title>
      <description><![CDATA[ 摘要：提出了PC与基本速率ISDN连接的软硬件设计方案。介绍了基于PC总线、80C188微处理器、Mitel公司的ISDN通信器件以及IDT公司的EPLD逻辑硬件的ISDN卡的硬件结构，同时对软件的结构、任务和模块以及实现方案也作了 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1899.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1899.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:35 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[在屏显示器件MC141541及其接口技术]]></title>
      <description><![CDATA[ 摘要：MC141541是摩托罗拉公司生产的在屏显示（OSD）芯片。它采用I2C总线，具有接口方便、通用性强的特点，因而能够节省大量的系统资源。可用来显示仪器及设备在视频图像上叠加所测量的参数及信息提示。文中介绍了 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1900.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1900.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:35 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[用MC145026/27实现多机并口线通信]]></title>
      <description><![CDATA[ 摘要：介绍了一种用三态编解码芯片MC145026/27实现的基于并口的多机线通信系统的组成原理和实现方法，给出了多台微型机之间的无线通信问题的解决方案等，阐述了系统的总体组成及通信方法。    关键词：并行接口 无 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1901.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1901.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:24 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[原型验证过程中的ASIC到FPGA的代码转换]]></title>
      <description><![CDATA[ 在对ASIC设计进行FPGA原型验证时，由于物理结构不同，ASIC的代码必须进行一定的转换后才能作为FPGA的输入现代集成电路设计中，芯片的规模和复杂度正呈指数增加。尤其在ASIC设计流程中，验证和调试所花的时间约占总工 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1902.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1902.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:24 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[基于USB的通用无线传输接口设计]]></title>
      <description><![CDATA[ 摘  要：介绍一种基于Philips公司的32位ARM7T)MI—s微处理器LPC2210的USB接口设计，并使用Nordic公司生产的单片射频收发芯片nRF2401设计USB接口的无线通信模块。阐述该系统的工作原理、硬件构成及软件设计方案。实现 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1903.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1903.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:10 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[蓝牙模块和OMAP5910的接口技术]]></title>
      <description><![CDATA[ 摘  要：研究一种嵌入式数字信号处理器(DSP)()MAP59lO的蓝牙接口实现。整个系统以DSP为核心，采用TI公司的BRF6100蓝牙模块实现V1．1协议，进行无线信号收发；DSP配置音频AD／DA，实现音频信号采集和处理。该系统制造 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1904.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1904.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:10 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Profibus现场总线智能从站通信接口设计]]></title>
      <description><![CDATA[ 摘　要　Profibus现场总线以其卓越的技术性能，在全世界范围内得到广泛的应用。研究Profibus技术，开发Profibus产品有较大的现实意义。本文着重描述了从站接口的实现原理及设计过程，包括软件和硬件设计，为Profibus ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1905.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1905.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:02 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[基于USB-Host的大容量数据采集系统的设计]]></title>
      <description><![CDATA[ 要 利用USB主控制器控制U盘作为数据采集系统的移动存储器。该设计基于USB主/从控制芯片CH375S，遵守大容量存储设备类规范中的BulkOnly 和UFI子规范，支持FAT16文件系统，实现了数据采集系统中可用U盘进行数据存储，方 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1906.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1906.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:50:02 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[USB键盘特殊功能键的实现]]></title>
      <description><![CDATA[ 引言　　随着计算机接口技术的日新月异，传统的PS2键盘已不再对市场形成垄断，USB键盘正在逐渐扩大市场占有率。与此同时，USB键盘也在不断完善自身的功能，由于传统的107键结构键盘已无法满足用户的需要，所以带有特 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1907.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1907.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:49:50 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[单片机通过CH375读写U盘文件的问题解答]]></title>
      <description><![CDATA[ * 需要设计参考资料（光盘资料可以参考FILELIST.TXT文档，网上资料更新）  USB主机方式的应用可以参考CH375的资料，与计算机连接的USB设备方式（或自己做U盘）可以参考CH372  的资料。如果是读写U盘并且用量较少或者 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1908.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1908.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:49:50 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[单片机系统与标准PC键盘的接口模块设计]]></title>
      <description><![CDATA[ 摘 要： 本文介绍了一种单片机系统与标准PC键盘接口模块，并详细介绍了该模块的工作原理与软件编程思想。关键词： 单片机系统；PC键盘；接口模块；输入；FIFO 概述    在单片机系统中，当输入按键较多时，在硬件设计 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1909.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1909.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:49:38 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[基于USB高速数据采集系统的设计]]></title>
      <description><![CDATA[ 在图像处理、瞬态信号测量等一些高速、高精度的应用中，需要进行高速数据采集。USB 2.0接口以其高速率等优点渐有取代传统ISA及PCI数据总线的趋势，热插拔特性也使其成为各种PC外设的首选接口。EZ-USB FX2是Cypress公 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1910.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1910.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:49:38 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[基于电子镇流器的功率因数校正电路的解析及应用]]></title>
      <description><![CDATA[  摘  要：IR2166／IR2167是集功率因数校正器(PFC)、镇流器和半桥驱动器为一体的新型电子镇流器驱动电路。内部的功率因数校正(PFC)电路以临界导通模式(CCM)工作，可获得高功率因数、低总谐波失真（THD)及直流电压调整 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1911.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1911.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:49:23 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[Broadcom与同洲电子合作全方位开拓中国机顶盒市场&amp;nbsp;]]></title>
      <description><![CDATA[ 北京，2007年1月15日 － 全球有线和无线通信半导体市场的领导者Broadcom(博通)公司（Nasdaq：BRCM）今天宣布，Broadcom已经成为深圳市同洲电子股份有限公司下一代IP机顶盒产品的主要芯片供应商。同洲电子专门针对中国 ]]></description>
      <link>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1912.html</link>
      <guid>http://www.xxlinux.com/linux/embed/article/Interface/2009-03-31/1912.html</guid>
      <category>接口电路</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 31 Mar 2009 02:49:23 +0000</pubDate>
    </item>
  </channel>
</rss>